Bluetooth GPS Set-Up Guide

To set up a Bluetooth connection with your Globalsat GPS receiver, follow these steps:

1. Tap the Bluetooth icon in the lower-right corner of the screen
2. Select “Turn radio ON”
3. Tap the Bluetooth icon again and select “Add a Bluetooth Device”
4. Check “My Device is set up and ready to be found” in the “Add Bluetooth Device Wizard” and click “Next”.
5. Select “New Device” from the displayed Bluetooth devices and tap “Next”.
6. Tap “Use the passkey found in the documentation”.
7. Enter the Passkey Code (or PIN code) for the GPS receiver and select “OK” (For the BT-308 passkey code is 2003 and for the BT-328, BT-338 & BT-359 GPS receivers it’s 0000).
8. Bluetooth Manager will display and designate an Outgoing and Incoming port for your device. (NOTE: Utilize the Outgoing port for third party navigation application port configuration.)
9. Select “Finish” to complete Bluetooth device configuration.

NOTE:
In most cases, mapping and navigation software require you to manually configure the assigned COM port of the GPS receiver in order to properly communicate and retrieve the GPS data. See your PDA’s User Guide for more details on assigned COM ports and you navigation User’s Guide on how to properly configure the GPS COM port to be read.

Download file here

Related PDF Manuals Guide:
TomTom GPS Receiver Technical Specification Manual
BlueTrek G2 User Guide
iBT-GPS Bluetooth GPS Receiver Users Manual
Using the PlayStation 3 Controller Manual PDF
iPhone Bluetooth Headset User’s Guide (Manual)
Building More Competitive Devices on Windows Mobile
A Hacker’s Introduction to the Nokia N900
How to Synchronize Email with Moto Q 9h