General Motors continues to invest in technologies that reduce greenhouse gas emissions and lessen the dependence on petroleum. Beyond today’s hybrids and alternative fuel solutions, GM is developing 09 game-changing technology with the upcoming Volt plug-in electric car and a test fl eet of zero-emissions Hydrogen Fuel Cell Vehicles already on the road. GM also demonstrates its commitment to environmental sustainability by the way it produces this brochure. Research has told us that people like you continue to value printed brochures. So GM prints them on Forest Stewardship Council-certifi ed paper. The goal is to protect wildlife habitat, ensure clean water and to keep forests healthy. It’s just one more way that GM integrates green thinking into every aspect of its activities. Just like you.

Follow the instructions in this document carefully. Failure to follow these instructions could damage your equipment and void its warranty.

Tools Required Use the screwdriver provided, or a Phillips #2 screwdriver, preferably with a magnetized tip Phillips #1 screwdriver Needlenose pliers Screw tray or equivalent to hold the screws A soft, clean towel or cloth

Route the black inverter cable along the side of the hard drive. With a needle nose pliers, plug in the inverter cable (the teeth on the connector face up.) Note: Move the hard drive out of the way if you can’t get the connector in place.

Download Manual PDF iMac G5 Panel Display Replacement Instruction

Apple iMac G5 Motherboard PowerPC capacitors replaced. The iMac mother board pictured above shows the locations of the new capacitors installed. Note: The heights and diameters of the new capacitors are slightly bigger in this picture, than the original caps. Upgraded to 1,800 uf 10 volts from the original 1,800 uf 6.3 volts.

Back cover still clears (barely clears) all components. Important notes are as follows. It appears as though lead free solder was used and a polymer was coated on the assembled motherboard on the bottom. A very hot soldering iron is required. Doing it yourself is not for the faint at heart. But fear not, you can do it if you follow this procedure.

Viewing angle is an important consideration when using Remote Director. The user should only judge color when sitting directly in front of, and perpendicular to, the display. The viewing station should be angled so that the viewer can make comparisons without changing their viewing angle relative to the display.

Because today’s monitor technologies cannot achieve the illumination intensity of a standard pre-press viewing booth, a soft proof will appear too dark when compared to a hard copy proof illuminated in a standard graphic arts viewing booth. A dimmable D50 viewing booth located alongside the monitor mitigates this problem.

Power up the iMac G5 and the viewing booth and allow at least 30 minutes for all components to warm up. From the Apple Menu, select System Preferences, click on the Displays icon and confirm that the brightness is set at 100%, all the way to the right. Connect the Eye-One spectrophotometer or the Monaco OPTIX XR via an available USB port. NOTE: The Eye-One may need to be connected directly to the CPU to receive enough power, while the OPTIX XR can be connected to the keyboard.

Your iMac G5 has many built-in features and expansion capabilities you can use to customize your computer to fit your needs. Here are some of your computer’s features and capabilities: High-speed Universal Serial Bus (USB) 2.0 ports for connecting additional equipment, such as printers, scanners, joysticks, keyboards, digital cameras, and floppy disk drives.

FireWire 400 ports for connecting high-speed equipment, such as an iPod, iSight camera, digital video cameras, and external hard disk drives. Optional Bluetooth module for connecting wirelessly to digital devices. The latest in communications technologies, such as a 56K v.92 modem (on some models), 10/100Base-T Ethernet, and optional AirPort Extreme wireless networking. Combination headphone out/optical audio out port to connect headphones or digital audio equipment. VGA output with the Apple VGA Display Adapter lets you use your iMac G5 with an external monitor or video projector.

Check that the computer and the Memory Stick Reader/Writer support “Memory Stick PRO Duo”. Users of computers and Memory Stick Readers/Writers made by manufacturers other than Sony should contact those manufacturers. o If “Memory Stick PRO Duo” is not supported, connect the camera to the computer (pages 87, 95). The computer recognizes the “Memory Stick PRO Duo”.

Turn on the camera. o When the battery level is low, insert the charged battery pack or use the AC adaptor (not supplied) (page 87). o Set [USB Connect] to [Mass Storage] (page 70). o Use the cable for multi-use terminal (supplied) (page 87). o Disconnect the cable for multi-use terminal from both the computer and the camera, and connect it again firmly. o Disconnect all equipment other than the camera, the keyboard and the mouse from the USB connectors of your computer. o Connect the camera directly to your computer without passing through a USB hub or other device (page 87).